New Beetle L4-2.0L (BEV) (2004)
/Page-744001.png)
Accelerator Pedal Position Sensor: Service and Repair
Electronic Power Control (EPC)
Electronic Power Control (EPC)
Engine codes AVH, AZG, BDC, BEV, BGD
1. Mounting
2. Connector
^
Black, 6-pin
3. 10 Nm
4. Throttle Position (TP) sensor -G79- and Sender -2- for accelerator pedal position -G185-
^
On replacement, for models with automatic transmission, an adaptation must be performed
^
When removing remove instrument panel/pedal cluster cover
5. Retainer
^
For footwell cover
^
Clipped onto accelerator pedal
