New Beetle L4-2.0L (BEV) (2004)
If no DTCs are found in wires:
-
Replace Mass Air Flow (MAF) Sensor -G70- with Intake Air Temperature (IAT) Sensor -G42-.
-
Erase DTC memory of Engine Control Module (ECM), Diagnostic mode 4: Reset/erase diagnostic data. See: Testing and Inspection/Scan Tool
Testing and Procedures/Diagnostic Mode 4: Reset/Erase Diagnostic Data
-
Generate readiness code. See: Testing and Inspection/Monitors, Trips, Drive Cycles and Readiness Codes