New Beetle L4-2.0L (BEV) (2004)
-
Press selector lever cable -1- off selector shaft lever -4- with, for example, a 10 mm open end wrench -3-.
-
Press locking devices on selector lever cable support mounting together (arrows) and pull selector lever cable out of transmission support
mounting.
-
Disconnect connector -2- from Multi-function TR switch -F125-.
-
Remove nut -1-.
-
Pull spring ring -2- and lever -3- off selector shaft lever -4-.
-
Bend back hooks of locking plate -2- with a screwdriver.
Note: If one or more hooks of the locking plate break off while bending, the locking plate must be replaced.
-
Remove nut -1
-
Remove bolt-5-.