New Beetle L4-2.0L (BEV) (2004)
Vehicles with ESP
-
For vehicles with ESP, Steering Angle Sensor G85 is installed in housing - 1 - of return spring.
-
Disconnect harness connectors - 1 - and - 2 -.
-
Release catch - arrows - and pull return spring with Steering Angle Sensor G85 from steering column switch.
NOTE:
-
Wheels must be in straight-ahead position when removing or installing return spring with steering angle sensor.
-
A new return ring is secured in the centered position with a transport protection.
Installing
-
Installation is performed in the reverse order of removal.
For vehicles with ESP, also note the following:
-
Install return spring with Steering Angle Sensor G85 and engage. For a new component, remove transport protection.