New Beetle L4-2.0L (BEV) (2004)
-
Remove screw (under a cover cap) -arrow- from glove box -1-.
-
Remove the four screws -1-.
-
Unclip trim -2- at top and take off instrument panel.
-
Remove the six screws -3-.
-
Remove impact plate -4-.
Location: The sender for rotation rate -G202- -1- and the sensor for transverse acceleration -G200- -2- are secured to a bearing bracket on the steering
column -3-.
a - Steering column
-
Pull connector -arrow- off sender for rotation rate -G202- and pull connector off sensor for transverse acceleration -G200-.
-
Remove bolt -1- and take out sender for rotation rate -G202- and sensor for transverse acceleration -G200-.
Removing sender for rotation rate -G202