New Beetle L4-2.0L (BEV) (2004)
^
Observe installed position
20. Supply line
^
Black
^
Check if seated securely
^
To pull off of fuel filter press locking ring inward on connecting piece
21. Breather pipe
22. Seal
^
Replace if damaged
^
When installing, insert seal dry into fuel tank opening
^
Moisten with fuel only when installing fuel delivery unit flange.
23. Fuel delivery unit
^
Observe installed position of flange on fuel tank; Refer to Fig 1.
24. Union nut, 75 Nm
^
Remove and install with key 3217
25. Supply line
26. Return line
27. Gravity valve
28. Pressure retention valve
^
For fuel tank breather
^
Checking; Refer to Fig 3.
29. Ground connection
^
Check if seated securely
Fig. 1 Installed position of flange of fuel delivery unit
Marking on sender must align with the marking on fuel tank (arrows).
Blue or blue marked return line -1- to connection with identification -R-.
Black supply line -2- to connection with identification -V-.
Note: After installing fuel delivery unit flange, check that the supply, return and breather pipes are still clipped onto the fuel tank.
Fig. 2 Checking change-over valve
Lever in rest position: Closed
Lever pushed in direction of arrow: Open
Note: Before installing vent valve remove cap from fuel tank.