New Beetle L4-2.0L (BEV) (2004)
Pulling inner race off hub
Pressing in wheel bearing
-
Install wheel bearing -1-, press piece -2- (install with collar in bearing) and hollow piston cylinder -3- with pull rod on wheel bearing housing.
-
Install thrust piece -4- (with wide collar toward wheel bearing housing) and special nut -5- on the inside.
-
Press wheel bearing in by operating the pump.
-
Insert circlip with long nose pliers.
1. Wheel bearing
2. Thrust piece E-13-1
3. Hollow piston cylinder HKZ-15
4. Thrust piece E-10
5. Special nut E-8-214 and pull rod
Pressing in wheel hub
-
Install hub -1- and hollow piston cylinder -2- with pull rod on wheel bearing.
-
Install special nut -4- and thrust piece -3- (with collar towards special nut) on the inside.
-
Press in hub by operating the pump.
1. Hub
2. Hollow piston cylinder HKZ-15
3. Thrust piece E-5
4. Special nut E-8-214 and pull rod
Install in the reverse order of removal.