New Beetle L4-2.0L (BEV) (2004)
^
3094 Hose clamps
^
VAG 1331 Torque wrench
Removing
-
Check whether a coded radio is installed. If so, obtain anti-theft coding.
-
Remove cover from engine.
-
With ignition switched off disconnect battery Ground strap.
-
Pull intake hose -1- and connector -2- off Mass Air Flow (MAF) sensor.
-
Pull secondary air pump hose -3- off air cleaner housing.
-
Remove bolts -4-, -5- and -6-.
-
Remove air cleaner complete.
-
Clamp off ATF cooler hoses with 3094 clamps and disconnect from ATF cooler.