New Beetle L4-2.0L (BEV) (2004)
-
Tighten nut to prescribed torque
Note:
^
Carefully hold the selector lever -1- with a pair of pliers -2-, so that the torque is not transmitted to the Multi-function TO switch -F125-.
^
Ensure the slide valve -3- on the valve body (in which the selector lever engages) is not damaged.
-
Reconnect connections to respective solenoid valves -2- to -9- as per previous markings.
Note:
^
Interchanging the connections can destroy the transmission.
^
If a connection is damaged, the wiring harnesses or the valve body with solenoid valves must be replaced.
-
Route wiring harness -1- as per illustration.