New Beetle L4-2.0L (BEV) (2004)
Flex Plate: Service and Repair
Drive plate, removing and installing
Special tools, equipment, testers, measuring instruments and auxiliary items required
^
VW558 Counter support tool
^
Hex bolt M8 x 45 and two M10 hex nuts
^
Depth gauge
Loosening and tightening drive plate
^
Secure counter support tool VW558 to the drive plate with a M8 x 45 hex bolt. Place two M10 hex nuts between counter support tool and drive
plate.
Position of counter support tool:
A - To loosen
B - To tighten
Installing drive plate
^
Locate drive plate and packing plate with recesses -1-.
^
Install new bolts -3- and tighten to 30 Nm.