New Beetle L4-2.0L (BEV) (2004)
29
Differential side gear
-
Installing refer to Fig. 14
Fig. 1 Driving tapered roller bearing outer race out of clutch housing
Fig. 2 Pressing tapered roller bearing outer race into clutch housing
Note:
No shim is installed in the clutch housing end.
Fig. 3 Pulling off tapered roller bearing inner race
-
Position thrust piece 40-105 on differential housing.
-
Install puller.
Note:
Bot tapered roller bearing inner races are pulled off the differential housing in the same way
Fig. 4 Pressing on tapered roller bearing inner race
Note:
The tapered roller bearing inner races for the transmission and clutch housings are pressed on with the same tools.