New Beetle L4-2.0L (BEV) (2004)
Special tools and equipment
^
V.A.G 1582 Tapered roller bearing puller
^
V.A.G. 1582/6 Grip
^
1-Kukko 21/7 Internal puller
^
4-Kukko 22/2 Counter support
Note:
^
Heat tapered roller bearing inner race to 100°C before installing.
^
Always replace both tapered roller bearings together as a set.
^
If tapered roller bearings, differential housing, transmission housing or clutch housing are replaced, adjust differential.