New Beetle L4-2.0L (BEV) (2004)
-
VW 454 Thrust tube
-
41-501 Drift sleeve
-
VW 447 1 Thrust pad
-
VW 510 Thrust pad
Note:
- When Installing new gears, consult technical data.
- If the position of the tapered roller bearings is affected when replacing parts, the input shaft must be re-adjusted.
1
Clutch Housing
2
Tapered roller bearing outer race
3
Tapered Roller bearing inner Race
-
Drive off shaft with drift
4
Input Shaft
5
3rd Gear
-
Shoulder points to 4th Gear