New Beetle L4-2.0L (BEV) (2004)
Shift Interlock Relay: Testing and Inspection
Check Starting interlock relay -J207
Special tools and equipment
^
Refer to Wiring Diagrams
-
Remove cover in driver's footwell.
-
Turn ignition key to position "Start".
-
Move selector lever from position "S" to "P" and back to "S" again.
Starting interlock relay -J207- must audibly and perceptibly operate.
Starter must operate in positions "N" or"P" as long as no malfunction exists.
If the relay does not operate:
-
Check relay -J207- and wiring connections plate referring to wiring diagram.