New Beetle L4-2.0L (BEV) (2004)
Transmission Position Switch/Sensor: Adjustments
Multi-function TR switch -F125-, adjusting
-
Move selector lever to position "N".
Note: Do not kink selector lever cable.
Adjustment requirements
-
Selector lever cable is disconnected at selector shaft lever.
-
Selector shaft positioned at "N".
-
Multi-function TR switch -F125- securing bolts are loosened.
-
Selector shaft lever is removed.
-
Fit setting gauge onto selector shaft -2- and turn multi-function switch -1- until gauge engages into lug on multi-function switch connector.
-
Secure setting gauge on selector shaft -2- with bolt -3-.
-
Tighten bolts (arrows) to 6 Nm.
-
Remove setting gauge.
The remainder of the installation is in reverse order.