New Beetle L5-2.5L (BPR) (2007)
‹› Tightening Specifications: 5 Nm.
Adjusting the CD Changer Installation Position
-
Check whether both adjusting levers - arrow - on the CD changer are in the V (vertical) position.
‹› In the case of an incorrect adjustment, the CD changer skips.
-
If a readjustment is necessary, loosen the securing screws, move the adjusting lever up to the V position, and tighten the screws.
‹› Tightening Specifications 2 Nm
Installing
-
Screw side bracket - 1 - with screws - 2 - onto the CD changer.