New Beetle L5-2.5L (BPR) (2007)
-
Remove bolts - 4 - and - 7 -.
-
Pull left and right front part outward off threaded pins and remove forward from vehicle with aid from two technicians.
‹› Installing:
-
Before reattaching front part, adhere anti-friction foil - 11 - on contact areas, or check condition of old anti-friction foil.
-
When installing front part, ensure proper seating of insulation - 5 - on both sides of longitudinal members and make sure it engages properly on
headlamp bracket.
2
Bolt
‹› With nut
‹› 6 Nm
3
Combination Bolt
‹› 6 Nm
4
Bolt
‹› Qty. 18
‹› 7.5 Nm
‹› Insert with locking fluid (D 185 400 A2)
‹› Note tightening sequence
5
Insulation
6
Hex Nut
‹› 6 Nm
7
Bolt
‹› 7.5 Nm
‹› Qty. 4
‹› Insert with locking fluid (D 185 400 A2)
8
Bolt
‹› Qty. 2
‹› Insert with locking fluid (D 185 400 A2)
9
Expanding Clip
‹› Qty. 3
‹› To remove, press spreader pin through
10
Face Plate
11
Front Spoiler
12
Ventilation Grid