New Beetle L5-2.5L (BPR) (2007)
3)
With the help of a chisel, remove the weld pieces adhered to the bolts, to ensure a correct assembly of the reinforcement to the rear apron.
4)
Assemble reinforcement. See Repair Manual Group 53 Body in ElsaWeb.
5)
Assemble rear bumper module starting from call-out number 1 to call-out number 10 (from center to both sides of the bumper cover) as shown in
the illustration
6)
Tighten the rest of the screws of the bumper module, following the sequence indicated in the Repair Manual Group 53 Body in ElsaWeb.
Warranty
* Code per warranty vendor code policy.
Required Parts and Tools
No Special Tools required.
No Special Parts required. Always see ETKA for the latest part(s) information.
Technical Service Bulletin # 6307-01
Date: 070227
Body - Rear Bumper Cover Wavy or Distorted
63 07 01
Feb. 27, 2007
2013104 Supersedes T.B. Group 63 number 06-01 dated Oct. 24, 2006 to include New Beetle Sedan Bumper Rear Cover, Deformation, U.S.
Customer may comment about wave or distortion in bumper rear cover.
Condition