New Beetle L5-2.5L (BPR) (2007)
‹› The bracket must press the door storage compartment against the door trim.
-
In the lower area of door handle - 7 -, bore two holes - 6 - with a diameter of 5 mm in the upper anchoring point of bracket - 1 - for tips - 8 -.
-
Hook bracket - 1 - with tips - 8 - into holes - 6 - and press against door trim on underside - arrows -. Mark lower holes - 2 - for bracket.
-
Remove bracket - 1 - and door storage compartment - 5 - and bore two holes with a diameter of 3.5 mm.
-
Hook bracket - 1 - and door storage compartment - 5 - in again and bolt on the door trim using securing nuts (clamping nuts) - 4 - and screws- 3 -.
-
If protective padding - 1 - was removed, adhere new protective padding to door trim - 2 - using the 2-component glue (D173 KD2 A1).