New Beetle L5-2.5L (BPR) (2007)
-
Lower door window until securing bolts of door window are accessible.
‹› If work step is not possible due to malfunction of the electrical window regulator, window regulator motor can be removed to be able to slide
window down.
-
Loosen bolts - 2 - and press clamping brackets apart.
-
Slide door windows upward and secure (e.g. using adhesive tape).
-
Remove operating lever for front hood lock (driver's side only). Refer to => [ Operating Lever ] See: Hood/Service and Repair/Hood.
-
Remove lower A-pillar trim.
-
Disconnect multi-pin harness connectors - 1 - at A-pillar - 2 -.
-
Remove cover - 1 - for wiring harness - 2 - out of body opening in inner A-pillar.