volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Inner and Outer Roof Crossmember, Convertible|Page 13678 > < Glove Compartment Lock Cylinder|Service and Repair|Page 13673
Page 1
background image

Headliner: Service and Repair
Inner and Outer Roof Crossmember, Convertible

Roof Trim

Inner and Outer Roof Crossmember, Convertible

Removal

-

Remove the A-pillar trim. Refer to => [ Upper A-pillar Trim Assembly Overview ] . 

-

Remove the sun visor.

-

Remove the interior rearview mirror.

-

Remove the vanity mirror lamps. 

-

Remove bolts - 7 -.

-

Loosen front trim - 5 - and disconnect at the rear. 

-

Remove crossmember seal - 4 -. Refer to => [ Roof Crossmember Seal and Retaining Track Assembly Overview, Convertible ] See: Roof and
Associated Components/Convertible Top/Convertible Top Moulding / Trim/Service and Repair/Roof Trim Overview.

-

Detach the door seal in the area of the A-pillar - arrow  -.

-

Unhook trim - 1 - and push in an upward direction. 

Installation

Installation is the reverse of removal.

‹› Prior to installing trims - 1 - and - 5 -, check the condition and seating of clips - 2 - and -  6 -. Replace the clips if necessary.

Inner and Outer Roof Crossmember, Convertible|Page 13678 > < Glove Compartment Lock Cylinder|Service and Repair|Page 13673