New Beetle L5-2.5L (BPR) (2007)
Scuff Plate: Service and Repair
Sill Panel Trim
Sill Panel Trim
=> [ Sill Panel ]
=> [ Sill Panel Trim, Convertible ]
Sill Panel
Removal
-
Remove lower A pillar trim. Refer to => [ Lower A-pillar Trim ] See: Trim Panel/Service and Repair/Pillar and Side Trim.
-
Remove side trim. Refer to => [ Side Trim Assembly Overview ] See: Trim Panel/Service and Repair/Pillar and Side Trim Overview.
-
Unclip sill panel - 1 - upward.
Installation
To install, perform the steps used in removal in reverse order.
‹› Before installing the sill panel, check the clips -=> [ (Item 2) Clips ] See: Sill Panel Trim Assembly Overview- and replace, if necessary.
‹› After installing, make sure that sill panel seal is properly seated - 3 -.
Sill Panel Trim, Convertible