New Beetle L5-2.5L (BPR) (2007)
5
Protective cap
‹› Pull onto brake carrier and guide pin
6
Brake carrier with guide pins and protective cap
‹› Supplied as pre-assembled replacement part with sufficient grease on guide pins
‹› If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate guide pins
7
Protective seal
‹› Pull onto piston with outer sealing lip
8
Piston with automatic adjustment
‹› Removing and installing => [ Brake Caliper Piston ] See: Service and Repair/Overhaul/Brake Caliper Piston.
‹› Apply thin coat of assembly paste (G 052 150 A2 ) on piston
9
Seal
‹› Removing and installing => [ Brake Caliper Piston ] See: Service and Repair/Overhaul/Brake Caliper Piston.
10
Brake caliper housing with parking brake cable lever
‹› Removing and installing => [ Brake Caliper ] See: Service and Repair/Removal and Replacement/Brake Caliper.
‹› Replace if leaking at parking brake cable lever=> [ Pressure Leak Test ] See: Testing and Inspection/Pressure Leak Test.
‹› Pre-bleed caliper housing after repairing => [ Brake Caliper, Pre-Bleeding ] See: Service and Repair/Overhaul/Brake Caliper Piston.