New Beetle L5-2.5L (BPR) (2007)
1
Hex bolt, self-locking, 35 Nm
‹› Replace
‹› When loosening and tightening, counter-hold on guide pin
2
Bleeder valve
‹› Lightly grease thread with assembly paste (G 052 150 A2) before screwing in
3
Dust cap
4
Guide pins
‹› Grease before pulling on protective cap
5
Protective cap
‹› Pull onto brake carrier and guide pin
6
Brake carrier with guide pins and protective cap
‹› Supplied as pre-assembled replacement part with sufficient grease on guide pins
‹› If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate guide pins
7
Protective seal
‹› Pull onto piston with outer sealing lip