New Beetle L5-2.5L (BPR) (2007)
Fuel Filter: Service and Repair
Removal and Installation
Engine Code BPR (Metal Fuel Tank)
Fuel Filter
Special tools, testers and auxiliary items required
‹› Torque wrench (5-60 Nm) (VAG 1783)
Removing
-
Remove the fuel delivery unit. Refer to => [ Fuel Delivery Unit ] See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Tank/Service
and Repair/Removal and Replacement/Removal and Installation/Fuel Delivery Unit.
-
Disconnect the ground (GND) wire - 1 -.
-
Disconnect the supply line at connection - 3 - or - 4 - (depending on accessibility). To do so, press in the securing ring.
-
Loosen the clamp - 2 - and remove the fuel filter - 5 - to the side.
Installing
-
Install the fuel filter - 7 - as shown in the illustration.
alpha Approximately 20°
3
Supply flow
4
Return flow