New Beetle L5-2.5L (BPR) (2007)
Instrument Panel Control Module: Customer Interest
Instrument Cluster - Incorrect Mile/Kilometer Adaptation
90 07 04
June 1, 2007
2015164
Vehicle Information
Condition
Instrument Cluster, Incorrect Adaptation when using Brand CD 10.76 (U.S. ONLY)
Incorrect instrument cluster adaptation software has been identified in Brand CD 10.76.
Note:
Following this procedure as outlined will have no adverse effect on the odometer.
Until this issue has been corrected on Brand CD 10.77.01 for the Passat, Eos, and GTI and on Brand CD 11.78.00 for the Jetta, please follow service
procedure below when adapting instrument cluster to vehicle.
Technical Background
Scan tool software adapts incorrect mileage when using Guided Fault Finding (GFF) on an instrument cluster coded to miles.
To correctly adapt the new instrument cluster:
1.
Change/code the old instrument cluster to Kilometers.
2.
Run the GFF Function test to replace the Instrument cluster.
3.
Change/code the New Instrument cluster from kilometers back to miles.
Production Solution
No production change required.
Service
Procedure
^
Select Guided Fault Finding.
^
Press the Go To button and select Function / Component Selection.