New Beetle L5-2.5L (BPR) (2007)
/Page-3222002.png)
operation, can cause the glass to cloud over.
-
Install in reverse order of removal.
NOTE: When installing, ensure bulb holder engages fully in housing, and turn in opposite direction of removal.
Rear Side Marker Light Bulb, Replacing
Rear Side Marker Light Bulb, Replacing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove rear inner fender liner.
-
Turn bulb holder in direction shown -arrow- and pull out from housing.
-
Pull out bulb (12 V/5 W), do not turn.
Installing
CAUTION: Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation can cause the glass to cloud over.
-
Install in reverse order of removal.
NOTE: When installing, make sure bulb holder engages in housing by turning in opposite direction shown -arrow-.
