New Beetle L5-2.5L (BPR) (2007)
Fuse Block: Service and Repair
Relay Panel and 13-Pin Relay Carrier
Fuse Panel and Relay Carrier
CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to =>
[ Battery A, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Procedures/Battery A,
Disconnecting and Connecting.
Relay Panel and 13-Pin Relay Carrier
CAUTION!
When disconnecting and connecting the Battery ( A), the procedure must be followed as described in the Repair Information. Refer to =>
[ Battery A, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and Repair/Procedures/Battery A,
Disconnecting and Connecting.
Removing
-
Disconnect the Battery (A). Refer to => [ Battery A, Disconnecting and Connecting ] See: Starting and Charging/Battery/Service and
Repair/Procedures/Battery A, Disconnecting and Connecting.
-
Remove the instrument panel trim panel on the driver side.
-
Loosen both nuts - C - and all connectors - D -.
-
Remove the relay panel - B - and relay carrier - A - downward.
Installing
Install in reverse order of removal, noting the following:
-
Tighten the nuts - C - to 3 Nm and the threaded connections - D - to 9 Nm.