New Beetle L5-2.5L (BPR) (2007)
-
When replacing fuel delivery unit, fuel supply system must be bled.
15
-
10 Nm
16
-
Protective plate
17
-
Fuel tank
-
Support using engine/transmission jack V.A.G 1383 A when removing
18
-
Securing strap
-
With rubber profile and spacer sleeve
19
-
20 Nm plus an additional 1/4 turn (90 degrees)
-
Replace
20
-
20 Nm plus an additional 1/4 turn (90 degrees)
-
Replace
21
-
3 Nm
22
-
CW-trim
23
-
3 Nm
24
-
Heat shield
-
For fuel tank
25
-
To Evaporative Emission (EVAP) Canister Purge Regulator Valve 1 N80
26
-
Connection for supply line
27
-
To fuel rail
28
-
Fuel filter
-
Installed location: Arrows point in direction of flow
-
Secured to fuel tank
-
Removing and installing fuel pressure regulator
-
When replacing fuel filter, fuel supply system must be bled.
29
-
To connection in fuel tank
30
-
Supply line
-
Black
-
Ensure seated tightly
-
To disconnect fuel filter and connection, press in securing ring on connecting piece.
-
Note installation position: Straight and long connection - arrow - points toward fuel filter
31
-
Seal
-
Replace
-
Note installation position: Bulge rests on fuel tank
Installation Position Of Fuel Delivery Unit Flange
Arrow - A - on flange must point toward rear in parallel to longitudinal axis of vehicle - B -.