New Beetle L5-2.5L (BPR) (2007)
Engine Control Module: Service and Repair
Engine Control Module
‹› If the Engine Control Module (ECM) will be replaced, connect the vehicle diagnostic tester and perform the " Replacing Engine Control Module"
guided function.
Removing
-
Switch off the ignition.
-
Remove the inner cover of the left plenum chamber.
-
Carefully press off the mounting bracket - arrow -.
-
Disengage the connectors from the control module and then disconnect the connectors.
-
Remove the control module.
Installing
-
Connect and engage the harness connectors at the control module.
-
Insert the new control module in the retaining frame.