New Beetle L5-2.5L (BPR) (2007)
1 - Steering Wheel
‹› Removing, refer to => [ Steering Wheel Assembly Overview ] See: Steering Wheel Assembly Overview
‹› When installing the pay attention to the installation position.
2 - Harness Connector
‹› Driver airbag units can have one or two harness connectors, one for igniter 1 and two (green and orange) for airbag units with igniter 2.
3 - Bolt
‹› 60 Nm
‹› Coated with locking compound
‹› May be used up to five times
Press in a punch indentation after each installation
4 - Airbag Unit
5 - Catches
‹› Are released from back of steering wheel
6 - Steering Wheel Spoke Trim
‹› Always replace
7 - Securing Plate
8 - Coil Connector With Slip Ring
‹› Removing and installing, refer to => [ Return Spring with Slip Ring ] See: Airbag
Front Passenger Airbag Unit Assembly Overview
Airbag
Front Passenger Airbag Unit Assembly Overview