New Beetle L5-2.5L (BPR) (2007)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Wires
Wheel Speed Sensor Wires
Special tools, testers and auxiliary items required
‹› Wiring harness repair kit (VAS 1978)
-
Note radio code (for vehicles equipped with coded anti-theft radio).
-
Disconnect battery.
-
Disconnect harness connector from wheel speed sensor wire and wheel speed sensor.
-
Rear side trim, removing
-
Cut wheel speed sensor wire - arrow - using wire strip pliers from (VAS 1978) and remove faulty piece of wire.
-
Strip 15 mm of insulation at end of wire using wire strip pliers and fold un-insulated wire in half.
-
Thread new wheel speed sensor wire.
-
Connect wheel speed sensor and sensor wire.
-
Clip in wheel speed sensor wire - arrows -.