New Beetle L5-2.5L (BPR) (2007)
Power Window Switch: Service and Repair
Window Regulator Switches, From 05.2008
Interior Lamps and Switches
‹› When removing and installing components in visible area (switches, covers, trim panels), cover by taping the areas at which a prying tool (plastic
sedge, screwdriver) will be positioned using commercially available adhesive tape.
Window Regulator Switches, From 05.2008
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the key.
‹› When removing and installing components in visible area (switches, covers, trim, etc.), cover by taping the areas at which a prying
tool ( (VAS 3409), screwdriver) will be positioned using commercially available adhesive tape.
Removing
-
Remove door trim panel.
-
Disconnect the connector on the window regulator switch.
-
Bend the frame outward at the top of the switch and remove the switch.
Installing
Install in reverse order of removal.