New Beetle L5-2.5L (BPR) (2007)
-
Carefully pull out Transmission Fluid Temperature Sensor (G93) - 7 - together with bracket from valve body.
‹› For reinstallation, pay attention to mounting of bracket on Transmission Fluid Temperature Sensor (G93).
-
Unclip wiring harness at bracket - 8 -.
-
Remove selector lever - 1 - on selector shaft.
‹› Carefully hold selector lever - 1 - in place using pliers - 2 -, so that torque is not transferred onto Multi-Function Transmission Range (TR) Switch
(F125).
‹› Ensure the slide valve - 3 - on valve body, in which the selector lever engages, is not damaged.