New Beetle L5-2.5L (BPR) (2007)
Clutch Master Cylinder: Service and Repair
Master Cylinder
Special tools, testers and auxiliary items required
‹› Pliers (T10005)
‹› Torque wrench 5 to 50 Nm (V.A.G 1331)
Removing
-
First determine whether a coded radio is installed. In this case, determine anti-theft coding.
-
Disconnect battery ground (GND) cable with ignition switched off.
-
Disconnect intake air duct - 1 - and connector - 2 - from Mass Air Flow (MAF) sensor (G70).
-
Remove bolts - 3 - and - 4 -.
-
Remove complete air filter.
-
Remove control module and ABS hydraulic unit.
‹› For the following work, make sure brake fluid does not come into contact with longitudinal member or transmission. However, in case of contact
clean this area thoroughly.
-
Lay lint-free cloth under master cylinder.
-
Disconnect return hose - A - to brake fluid reservoir and seal.