New Beetle L5-2.5L (BPS) (2006)
-
Install rubber buffers on both sides of rear lid.
-
Install adjustment buffer - 1 - in sealing channel so that adjustment buffer can still just be turned by hand.
-
Slide adjustment buffer - 1 - to uppermost position - arrow -.
-
Close rear lid completely and open again.
-
Slide adjustment buffer - 1 - in sealing channel on both sides upward (dimension - a - = 1 to 2 mm) and tighten bolt - 2 -. Tightening specification:
10 Nm
‹› Rear lid must be able to be closed without much force and must not have no play up and down when locked. Rear lid is slightly lifted by
pre-tension when lock is released.