New Beetle L5-2.5L (BPS) (2006)
-
Remove bolts - 5 - for steering gear.
-
For TDI engines, remove bolts - 6 - for exhaust system.
-
Place engine/transmission jack (V.A.G 1383 A ) with (V.A.G 1359/2) under subframe.
-
Remove bolts - 3 - and - 4 - for subframe.
-
Remove coupling rod nut - 7 - from stabilizer bar.
-
Lower subframe using engine/transmission jack ( V.A.G 1383 A).
Installing
Before fastening bolts for subframe, position steering gear on subframe and fasten bolts for steering gear.
Threaded sleeve - 1 - of steering gear must sit in bore of subframe.
-
Tighten bolts for control arm and ball joint on to old marks.