New Beetle L5-2.5L (BPS) (2006)
Loading Edge Cover
Removal
-
Loosen storage area floor cover from trim (two twist locks).
-
Press the pins of expanding clip - 4 - through the clip and remove the expanding clip.
-
Remove lock carrier cover - 1 - in the area of spring clips - 2 -.
-
Carefully unhook hooks on outer edges of trim.
-
Remove lock carrier cover - 1 - from the lock carrier in an upward direction.
Installation
Installation is the reverse of removal.
‹› Prior to installation, check clips - 5 - and replace if necessary.
‹› After assembling trim, make sure seal is properly fitted.
Upper A-Pillar Trim Assembly Overview
Pillar and Side Trim
Upper A-pillar Trim Assembly Overview