New Beetle L5-2.5L (BPS) (2006)
-
Remove clips - 1 - for A-pillar trim - 6 - starting at the top and remove the trim.
-
Separate harness connector - 3 -.
Installation
Installation is the reverse of removal.
‹› Before installing trim - 1 -, check clips - 5 - and replace them if necessary.
‹› After assembling the trim, make sure the door inner seal is properly fitted.
Lower A-Pillar Trim
Pillar and Side Trim
Lower A-pillar Trim
Removing on the driver side
-
Remove the hood operating lever.
-
Remove the center part of clip - 4 - and remove the clip from the trim.