New Beetle L5-2.5L (BPS) (2006)
‹› If the ABS warning lamp (K47) - 1 - does not go out after the ignition is switched on and the test sequence is complete, malfunction causes could
be:
a
Voltage supply is under 10 volts.
b
There is an ABS malfunction.
The ABS system remains switched off during an ABS malfunction, but the traditional brake system remains fully functional.
c
There was a sensor malfunction since the last vehicle start (sporadic).
In case of a sensor malfunction, the ABS warning lamp will go out automatically after vehicle is started again and a speed of 20 km/h has been
exceeded.
d
The connection between instrument cluster and ABS control module (J104) is interrupted.
e
The instrument cluster is malfunctioning
ABS Warning Lamp (K47) and Brake System Warning Lamp (K118)