New Beetle L5-2.5L (BPS) (2006)
/Page-1901003.png)
-
Loosen hex socket head screws diagonally.
-
Remove brake line from flaring tool, clean and check brake line and flared head.
Briefly rinse part of brake line remaining in vehicle.
-
Connect brake filler/bleeder unit (VAS 5234), place bleeder container hose on flanged head of brake line and run brake filler/bleeder unit (VAS
5234) briefly until some brake fluid runs through.
-
Blow out brake line to be inserted with compressed air.
-
Join brake lines with connecting piece - E -.
-
Assemble brake line.
-
Brake system, bleeding, vehicles with and without ABS Mark 20 IE up to 09.00 => [ Brake System Bleeding General Information ] See: Brake
Bleeding/Service and Repair/Brake System Bleeding General Information.
-
Brake system, bleeding, vehicles with ABS Mark 60 as of 10.00 => [ Brake System Bleeding General Information ] See: Brake Bleeding/Service
and Repair/Brake System Bleeding General Information.
