New Beetle L5-2.5L (BPS) (2006)
Valve Cover: Service and Repair
Cylinder Head Cover
Special tools, testers and auxiliary items required
‹› Torque wrench (5-50 Nm) (VAG 1331)
Removing
-
Remove the engine cover.
-
Disconnect the air hose for the crankshaft housing ventilation - arrow -.
-
Remove the Secondary Air Injection (AIR) connecting pipe - A -.
-
Remove the ignition coils - 1 through 5 -. Refer to => [ Ignition Coils with Power Output Stages ] See: Powertrain Management/Ignition
System/Ignition Coil/Service and Repair.
-
Remove the cylinder head cover bolts in sequence - 16 through 1 -.
Installing
Install in reverse order of removal. When doing this note the following:
‹› Replace the cylinder head cover if damaged or leaking.
-
Clean the sealing surfaces so they are completely free of any oil or grease.