New Beetle L5-2.5L (BPS) (2006)
‹› Checking, refer to => [ Oil Pressure and Switch, Checking ] See: Engine Oil Pressure/Testing and Inspection.
from Intake Hose
‹› See - item 1 - in => [ Intake Tube ] See: Tune-up and Engine Performance Checks/Air Cleaner Housing/Service and Repair/Removal and
‹› Due to 4 point lock, only disconnect when the oil filter bracket is to be removed.
Oil Filter Housing, 25 Nm
‹› Remove and install using oil filter wrench (3417 ).
‹› Draining, refer to => [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and Repair.
‹› Insert when oiled.
‹› Note the installed position:
Service flag must be at the top.
Oil Filter Element
‹› Drain the oil filter housing before removing, refer to => [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and Repair.
‹› See note in => [ General Repair Information ] See: Description and Operation/General Repair Information.
‹› Ensure sufficient clearance to surrounding components.
‹› Coolant hose connection diagram, refer to => [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams.
Bolt, 25 Nm
to Thermostat Housing