New Beetle L5-2.5L (BPS) (2006)
-
Press new oil filter insert - 2 - onto oil filter housing center tube - 4 - as far as stop.
Oil filter housing, installing
-
Install oil filter housing - 4 - with new sealing ring - 3 - and new oil filter insert - 2 - by hand until almost on oil filter housing stop - 1 -.
-
Tighten the oil filter housing - 2 - to 25 Nm.
-
Install dust cap - arrow - hand-tight in oil filter housing.
Oil Filter, TDI PD, Replacing
Removing
‹› Observe waste disposal regulations!
‹› Oil new O-rings before installation.
Loosen sealing cap - arrow - e.g. using ring wrench AF 36 or using socket insert AF 36 (T10125 ).