New Beetle L5-2.5L (BPS) (2006)
Oil Pan: Service and Repair
Upper Oil Pan
Upper Oil Pan
Special tools, testers and auxiliary items required
‹› Torque wrench (5-50 Nm) (VAG 1331)
‹› Locking pin (T10115)
‹› Adapter plates (2036/1)
‹› 3 M8 x 20 bolts and washers
‹› Hand drill with plastic brush attachment
‹› Protective eyewear
‹› Silicone sealant (D 174 003 A2)
Removing
-
Loosen the camshaft gears. Refer to => [ Valve Timing, Adjusting ] See: Cylinder Head Assembly/Adjustments.
-
Remove the control housing cover. Refer to => [ Control Housing Cover ] See: Camshaft, Lifters and Push Rods/Variable Valve Timing Cover /
Housing/Service and Repair.
-
Tension the chain tensioner - 1 - and secure it using (T10115).
-
Remove the guide rail - 2 -.
-
Remove the belt pulley side sealing flange. Refer to => [ Sealing Flange, Belt Pulley Side ] See: Cylinder Block Assembly/Sealing Flange, Engine
Front/Service and Repair/Sealing Flange, Belt Pulley Side.
-
Remove the lower oil pan. Refer to => [ Lower Oil Pan ] See: Lower Oil Pan.
-
Remove the bolts - 2 and 4 - and the oil intake pipe.