New Beetle L5-2.5L (BPS) (2006)
-
Insert a drift - 1 - into bore in (3364).
-
Using the drift - 1 - as a lever, pull out the valve stem oil seal - arrow -.
Installing
-
Place the plastic sleeve - A - on the valve stem to prevent damage to the new valve stem oil seal - B -.
-
Oil the sealing lip of valve stem oil seal - B -, insert in into the (3365) and carefully slide it onto the valve guide.
-
Remove the plastic sleeve - A -.
-
Install the valve spring and valve spring retainer.
-
Install the (VAS 5161) as shown.
Intake Side