New Beetle L5-2.5L (BPS) (2006)
‹› Using the body repair saw (VAG 1523), cut at a right angle through the connecting pipe at the separation point. Refer to => [ Cut the exhaust
pipe at the separation point using at a right angle. ] See: Front and Rear Mufflers, Separating and Connecting.
7
Nut, 20 Nm
8
Suspended Mount
9
Rear Muffler
10
Suspended Mount
‹› With retaining ring.
11
Tunnel Bridge
12
Nut, 25 Nm
Installed Position of Double Clamp
- Arrow - points in direction of travel.
-
Align the double clamp - 1 - to the mark on the catalytic converter - 2 -.
- a - = 5 millimeter (mm)
Clamp bolts must not project beyond the lower edge of the double clamp.