New Beetle L5-2.5L (BPS) (2006)
-
Remove the tape.
-
Make sure the tail lamps are working correctly.
Tail Lamp Bulbs, Through 06.2005
Removing and installing the bulbs for the turn signals, brake and tail lamps is identical. Only removing and installing the brake and tail lamps is
described here.
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the ignition key.
Removing
-
Remove the tail lamp, refer to => [ Tail Lamp, Through 06.2005 ].
-
Turn the bulb socket approximately 45° in direction of - arrow - and remove it from the housing.
-
Remove the bulb from the socket.
Two-filament bulb : 12 V 21/5 W
Installing
CAUTION!
‹› Do not touch the glass of the light bulb, when installing. Your fingers will leave traces of grease on the glass which, when the light is
switched on, will evaporate and cloud the glass.