New Beetle L5-2.5L (BPS) (2006)
-
Open spring clip - 3 - and disconnect intake hose. To do so, use spring clip pliers (VAS 5024A).
-
Remove banjo bolt - 4 -.
-
Seal pressurized line using a plastic bag or something similar.
-
Remove bolts - 1 - and - 2 -.
-
Remove pump.
Installing
-
Fill hydraulic oil into power steering pump.
Fill oil at pump intake connection.
-
Turn hub by hand until oil exits from pressure side.
-
Insert power steering pump in bracket and tighten bolts.
-
Connect intake hose and install spring clip.
Marking - arrow A - must align with cast seam - arrow -.