New Beetle L5-2.5L (BPS) (2006)
Tie Rod Boot: Service and Repair
Tie Rod Boot, Installing
-
Check boots for wear (slits, cracks) and check sealing surfaces of boots for dirt.
-
Install boots. Rotate tie rod beforehand so that stud of tie rod end stands in installation position.
‹› Only use original clamps.
-
Tighten clamp using hose clamp pliers (V.A.G 1275 ).
-
Install power steering gear.
Power steering gear, removing and installing => [ Power Steering Gear ] See: Steering Gear/Service and Repair/Removal and Replacement/Power
Steering Gear.